Monday, 3 December 2012

Contourbreton NC 260 - Replacement spindle clamp

Replacement spindle clamp 


 1 – Removing clamp cone
 
STEPS TO FOLLOW:
1 – Unscrew and remove cone on clamp

2 - Removing clamp gripper fingers

 
STEPS TO FOLLOW:
1 – Using your hands remove each gripper finger .
2 – To remove the last gripper finger using the T-hex wrench press the gripper finger holder. 

3 - Removing gripper finger holder assembly

 
STEPS TO FOLLOW:
1 –With the aid of long nose pliers remove the gripper finger holder.

4 - Cleaning

 
STEPS TO FOLLOW:
1- Spray the clamp cavity in the spindle.
2 – Wrap a clean rag or paper cloth around a screwdriver and clean the cavity.

5 -
Replacing gripper finger holder assembly
 
STEPS TO FOLLOW:
1 – Grease the seats for gripper fingers.
2 – With the aid of long nose pliers replace the gripper finger holder in its seat and with a T-hex wrench make sure it is level.

6 - Replacing clamp gripper fingers

 
STEPS TO FOLLOW:
1 – Grease all the parts of the gripper fingers that come into contact with the holder. 
2- Remount the gripper fingers one by one.  When mounting the first gripper finger if necessary with the aid of T wrench press the holder until the gripper finger is in its correct position.

7 - Replacing clamp cone

 
STEPS TO FOLLOW:
1 – Grease the cylinder and screw onto the clamp cone.
2 – Grease the smaller external diameter of the clamp.
3 – Screw the clamp cone onto the rod of the internal tie-rod.

8 - Measurement  control

 
STEPS TO FOLLOW:
1 – Measure the distance between the cone and the base of the spindle.
2 – Unscrew / screw the clamp cone until reaching a distance of 10.50mm.
3 – Once obtained this measurement secure the cylinder to the clamp cone. 

4 commenti:

  1. Nice blog.Thanks for the information.It is very usefull.Keep maintain this. R H Power Utilities Pvt Ltd Services is consistently rising and increasing our Spindle Repair services. Today, we provide advanced spindle analysis and testing, and repairs and rebuilds. For more info please visit http://rhpul.com/

    ReplyDelete
  2. Nice blog.Thanks for the information.It is very usefull.Keep maintain this. R H Power Utilities Pvt Ltd Services is consistently rising and increasing our Spindle Repair services. Today, we provide advanced spindle analysis and testing, and repairs and rebuilds. For more info please visit http://rhpul.com/

    ReplyDelete
  3. Thanks a lot

    Best regards
    Sergio Prior
    Marketing Manager
    Breton SPA

    ReplyDelete

You may also be interested in: