Breton Touch – Graphic user interface on multi-touch panel for Breton bridge saws

Hello everyone,

Are you ready to attend the Verona fair starting on 24th September?

Do not forget to visit Breton stands!

As usual, you will find us in the Hall 4, stands A6-C8 (our main stand) where no less than 6 machines will be exhibited, and in the Hall 5, booth C5, with other 3 machines.

Three first previews this year! One is Breton Touch, the innovative graphic interface for Breton Smart-Cut, Smart-Cut OPTIMA and Combicut bridge saws.

The Breton Touch spot shown at the fair is available here under. 

See you at the fair!
Bye-bye
Sergio Prior

Read More

Breton bridge saws, breton combicut, Breton Touch, Graphic user interface

Do you need an used machine for marble and granite?

If you’re looking for used machines for marble and granite, Contact us.

There are a lot of PROMOTIONS that you cannot miss!!!
 
Bye-bye
Sergio Prior

Read More

bridge saws, machines for granite, machines for marble, second hand stone machinery, stone router cnc, used stone machines

Work cycle for realizing the head of Michelangelo’s David with “Breton Contourfive”

1 - Average dimensions of the starting block: 400x400 mm, height 600 mm. (15.7x15.7x23.6")

2 - Processed material: I do not remember the exact name of the material; it was a medium-hard marble from Georgia containing much quartz. 

3 - Rough-hewing time using the disk: approx. 2 hours.

4 - Rough-hewing speed / disk feed time:
   1.500mm/min for a depth of 25mm (climb milling)
   59"/min for a depth of 1"    
   1.800mm/min for a depth of 15mm (conventional milling)
   70.9"/min a depth of 0.6"

5 - Time required for rough-hewing with disk: approx. 5 hours.


6 - Roughing out speed / disk feed time:
   1.500mm/min for a depth of 25mm (climb milling)
   59"/min for a depth of 1"    
   1.800mm/min for a depth of 15mm (conventional milling)
   70.9"/min a depth of 0.6"

7 - Time required for finishing with disk: approx. 2 hours.

8 - Finishing speed / disk feed time: 3.500mm/min (137.8")
    step = disk thickness.

9 - Time required for working with tapered tool: approx. 10 hours.

10 - Finishing speed / tool feed time: 1.200mm/min (47.2")
       step = 1mm (0.04")

I hope these figures are interesting for who works in the sector of sculptures.
For INFO and price ask to mail@breton.it.
We’ll get back to you promptly.
Well, that’s all for today, thanks for your attention.
Bye-bye 
Sergio Prior

Read More

5 axis machining centre, 5 axis stone working centre, architectural components, bas-relief, breton contourfive, tombstones, turning columns

EASYEDGE V7S - Vertical edge polisher with oscillating motion of the polishing spindles

Vertical edge polisher  with oscillating motion of the polishing spindles

Easyedge V7 is specially designed to polish straight, flat edges and to perform the upper and lower chamfers on natural and compound stone panels placed upright.
The polishing spindle unit is designed with oscillating motion in order to guarantee the maximum polishing degree, independently of thickness.
At the entry, the machine is equipped with a spindle which performs the profile-shaping of the edges, or the gauging of the piece lower part, or the “drip board cut”.

Because of its simple design, the Easyedge V7, which is delivered completely assembled, can be rapidly installed and started, even without the intervention of the Manufaturer’s skilled technicians.

It can be floor-anchored and does not require any foundations. The processing water is collected inside the machine and then conveyed to the point of discharge. 

The Easyedge V7 can polish materials up to 60 mm thick: the simple manual adjustment of the lateral presser bar according to the thickness of the piece to be worked is sufficient.

The standard machine is supplied fully equipped with:
• 1 spindle to perform the edge profile-shaping, or the thickness gauging, or the “drip board” carving.
• 7 spindles to polish the straight edge.
• 2 spindles to perform the standard  chamfers.
• 1 spindle  (+1 optional) to carry out deep edge bevelling.

Distinguishing characteristics 

• electromechanical control of the machine without any sophisticated electronic device, in order to facilitate maintenance and make it executable to the user himself;

• polishing spindles with pneumatic pressure, equipped with multiple-labyrinth frontal radial seals and protection bellows to secure maximum reliability when working under a jet of water;

• 2 chamfering spindles with pneumatic pressure (1+1 opposed spindles) to carry out standard chamfers;

• 1 bevelling spindle with mechanical positioning (plus 1 opposed spindle) to carry out deep edge bevelling. Bevels are then polished by the pneumatic chamfering spindles;

• oscillating movement of the polishing spindle  unit to guarantee the maximum polishing degree on the straight edge, independently of thickness;

• great stability of the vertical piece  under working thanks to the rigidity of the seat-guided conveyor belt;

• “Plug and Play” installation and start-up of the machine, without the intervention of the Manufaturer’s skilled technicians;

• guards to keep the processing water  inside the machine thus preventing it from polluting the surrounding area;

• guards and stainless steel electrical cabinet to avoid all problems of rust;

• the machine complies with CE or UL standards.

Are you interested in our EASYEDGE V7S?

Write to mail@breton.it asking for INFO and prices: we’ll get back to you promptly.
Well, that’s all for today, thanks for your attention.
Bye-bye

Sergio Prior

Read More

Breton Easyedge, polish straight flat edges, Vertical edge polisher

Breton CONTOURFIVE machining centre for marble and granite with bas-relief

Hello everyone,
Today let me show you a bas-relief produced by CONTOURFIVE, the machining centre with 5 interpolated axes made in Breton.

Breton CONTOURFIVE machining centre proves to be the ideal machine for those who produce architectural components, make restoration works and work marble and granite in the funerary art field.

Should you be interested in CONTOURFIVE, write to mail@breton.it for INFO and prices: we’ll get back to you promptly.

Well, that’s all for today, thanks for your attention.
Bye-bye
Sergio Prior

Read More

5 axis stone working centre, 5-axis machines, architectural components, bas-relief, bath tube, Breton cnc machine, breton contourfive