Contourbreton NC260K - Changing clamp for tool rack magazine

1- Tools required
- Allen wrench 4
- Pin punch
- Hammer
- Cross slot screwdriver


2 – Ensure the machine is safe to work on before proceeding with maintenance
Turn the key selector switch “Maintenance” to the left
Press the button “open doors”
Open the doors
Turn the key selector switch “Auxiliary” to the left


3 – Removing clamp
Unscrew the 2 screws which secure the clamp to the tool magazine


4 – Remove pin and plate
With the aid of the pin punch and hammer remove the pin.
Unscrew the plate


5 – Mount pin and plate
With the aid of the hammer position and insert the pin into the purpose hole.
Replace and screw the plate in position 


6- Mounting clamp
Insert the pin into the purpose hole.
– Screw and secure the 2 screw fixtures. 


7 – Testing clamp
To verify the clamp  has been replaced correctly, insert and extract a tool holder cone several times. 

The END

Breton cnc machine, cnc contouring machine, cnc stone router, contourbreton, granite, kitchen top router, marble