Contourbreton NC260K23 NEW! Don’t miss this opportunity

Contourbreton NC260K23 NEW!
SPECIAL PRICE. 


Major Components
- Basement including work bench and lateral shoulders for the bridge sliding, inside which are housed the guides, protected by bellows. The machine is equipped with a tank for wastewater collection and channelling.
- Spindle bridge housing the ground guides, protected by bellows, for the spindle-holding carriage sliding. The movement is by means of a digital brushless motor.
- Spindle carriage, made of iron casting and sliding on recirculating roller runner blocks ("X" axis) by means of a brushless motor. The spindle-holding ram ("Z" axis) slides vertically inside the carriage on recirculating roller runner blocks, driven by a ball screw / preloaded nut assembly which is powered by a digital brushless motor.
- Electrospindle with HSK-B80 tool-holder, cooled by electric refrigerator and provided with a middle duct to let the tool cooling water and taper cleaning air pass through.

- Grooved aluminium work bench for vacuum cup locking, fixed to the basement.
- 36-cell automatic tool magazine composed of two opposed, linear and lateral 18-cell tool magazines.
- Full protection system consisting of frontal protections with manual opening, con-forming to the CE standards.
- Siemens 840SL computer numerical control (CNC), capable of interpolating 3 axes, with optimization of the paths.
- Control monitor equipped with keyboard to enter the CNC data and including all the con-trols required to control both the machine and its accessories.
- Electric control cabinet.
Accesories
- Spindle inclination from 0 to +3°   
The spindle positioning and its hydraulic locking in place are carried out automati-cally in accordance with the preset work cycle program, while the desired inclination is selected activating manually the adjuster, which is installed next to the spindle.
  
- 4th C-axis for the continuous interpolated cut using a saw blade. This accessory makes it possible to use the cutting units holding a diamond saw blade and includes the prearrangement of the tool-store so as to accommodate the 90° and 60° head.

- Set of vacuum cups (H=150 mm) with mechanical lock support, complete with brackets.

- Parametric program to machine pockets with three-dimensional interpolation. This program is mainly used for the machining of kitchen tops with inclined surface.

- BretonCam PLUS 2.75 Stone CAD/CAM software
It is a powerful, user-friendly CAD/CAM software, to be installed on a PC outside the machine. The software is based on the icon programming principle and uses parametric technological macros for two-dimensional figures and to control three-dimensional surfaces. It makes it possible to draw numberless pieces with complex and sophisticated shapes through the CAD module and then prepare the work programs in a computer-aided way, processing the sequences of tools used in the various machining through the CAM module. This software simplifies the utilization of series of tools for polishing a profile. It enables to modify both the geometry of the pieces drawn and the sequence of tools used. It also allows to program dishing out machining on billets.

- Laser sensor to control the tool profile, diameter and length
with software for the NC automatic control and data storage. 

DON’T MISS THIS OPPORTUNITY!!

Write to mail@breton.it for PRICE and more INFO.
By-by
Sergio Prior
 
 

Breton cnc machines, cnc stone router, contourbreton NC260, countertop machine