This is default featured slide 1 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Thursday, 26 March 2015

VT Industries: A mass producer of quartz countertops

Initially recognized for its laminate and wood products, Holstein, IA-based VT Industries is now a leading producer of quartz and natural stone countertops in the southern California market. 
(by Stone World - Jennifer Adams).
Founded in 1956 by Roger Clausen, VT Industries remains a family-owned business — now under the leadership of its third generation. 
While the Holstein, IA-based company holds true to the same core values originally instilled by its founder, it also has grown and diversified since its origin. In addition to being a leading manufacturer of laminate countertops and wood doors, VT Industries also is a large producer of natural stone and quartz countertops. 
The company opened its facility in La Mirada, CA, five years ago, which houses its stone production and operates under a lean manufacturing system.

The California facility was established as a mass-produced quartz operation — with 95% of its products being engineered quartz surfacing. To ensure that the 130,000-square-foot plant runs as efficiently as possible, a lean manufacturing system was implemented. A large board is positioned in the facility where workers can easily view it, and it illustrates what needs improvement.

The focal point of the fully automated plant, which operates two shifts six days a week, is a Breton vertical computerized warehouse. The company receives 200 slabs weekly and maintains 2,000 slabs in house.
 
VT Industries’ stone division outputs 7,000 square feet of stone per week. The Breton storage system can hold up to approximately 200 slabs at a time and provides a sense of security — preventing the risk of a slab getting broken.
Before each slab is stored, it is cleaned and a photo is taken of it.
The company relies on its line-up of state-of-the-art machinery for its production process. The facility is equipped with two Breton Combicut disk and waterjet cutting centers. Each machine can cut up to 1,400 square feet of material per day. At any time, there is a job waiting to go.





Additionally, there are two Omega straight edge polishers, which are ideal for mass production. Each machine uses Terminator polishing pads.
 
Two CNC stoneworking centers — each with a dual table — are also in place. “The nice thing about these machines is there is minimal downtime,” said Production Manager Isaac Lastra, adding the CNC machines are used for abstract shaping and custom work. “We started with one and bought a second one at the beginning of [2014] because we were growing.”
 
Each CNC stoneworking center is programmed by the company’s CAD department. They can produce 13 different edges and use ADI tooling — supplied by GranQuartz — and Blick vacuum pods from Blick Industries of Laguna Beach, CA.

The plant also includes a water recycling system from Water Treatment Solutions of Hampton, NH. “We recycle 98% of our water every day,” said Lastra. A KMT waterjet from KMT of Baxter Springs, KS, as well as a Breton EasyEdge vertical edge polisher, are also utilized in the production process. Tools and accessories are mainly supplied by GranQuartz, and the company also purchases blades and polishing pads from Pietra Diamond of Anaheim, CA.
 


Recently, VT Industries started fabricating Dekton by Cosentino. The company is the only certified in its area for Home Depot. VT Industries worked closely with an engineer from Spain. “It took five or six jobs to get Dekton down,” said Lastra. “It cuts four times slower [than natural stone].”

According to the company, 98% of Dekton projects have a mitered edge. As a result, a Breton Speedycut CNC bridge saw is used specifically for cutting and mitering Dekton. The machine is equipped with Terminator blades from Continental D.I.A. of San Carlos, CA.
 


Because of its lean manufacturing system, VT Industries is starting to pick up more commercial work. At the time of Stone World’s visit, the company was working on a project for Amazon in Seattle, WA, and 17 corner desks for Terminal B at LAX airport in Los Angeles, CA.
 


VT Industries’ California location has 90 employees, including seven installation teams. For templating, LT-55 Laser Templators — both two and three dimensional — from Laser Products Industries in Romeoville, IL, are used. “We started doing a lot of commercial work, which required the three-dimensional [Templator],” explained Lastra.
 


Quality control is extremely important to the company. “Every [stone piece] receives a label to show customers that it has been inspected,” said Lastra. In addition to its stone fabrication facility, VT Industries has a facility in northern California, which is used for storage. “We send roughly 1,500 to 2,000 square feet [of material] every other day,” explained Lastra.
 


The company’s market is the entire state of California. It is contracted with all Home Depot stores, except in San Diego and Orange County. Additionally, the company ships material to Hawaii and Alaska.   

Thanks to Stone World and to Jennifer Adams.
Bye-bye
Sergio Prior

Thursday, 12 March 2015

Breton “SMARTCUT S/NC 550 OPTIMA” bridge saw produces kitchen tops!!!

Smart-Cut 550 OPTIMA, Breton’s fully-developed bridge saw, processes kitchen tops (and much more besides) same as a shaping machine does.

Good morning everybody,
Today I won’t take up much of your time!
See with your own eyes how the bridge saw for marble and granite  Breton Smart-Cut 550 OPTIMA produces kitchen tops.





This kind of bridge saw is excellent even when making engravings.

Once the kitchen tops are completed, the bridge saw Smart-Cut 550 OPTIMA starts processing a beautiful shower tray.




I guess you are pleasantly surprised!
;-))
Here you could find all the information relevant to the Breton bridge saw in the conveyor belt work bench version.

Otherwise here you may  read the online catalogue. 
Write to mail@breton.it for requesting an estimate.
We’ll get back to you promptly.
Thank you for the attention and best regards.
Bye-bye
 
Sergio Prior

Thursday, 19 February 2015

Breton Smart Cut 1000 – a SPECIAL bridge saw for SPECIAL works

A lathe-equipped CNC bridge saw with 5 interpolated axes turns into a through and through multitasking centre for stone.

Good morning,
Today I’ll show you how the lathe-equipped CNC bridge saw with 5 interpolated axes “Breton Smartcut 1000” manages to produce quite complex statues.

Such result is obtained starting from a simple marble block, using a diamond disk at the beginning and completing the process with a tool finish. 

Not bad, isn’t it?
Here below some data:
- The Madonna statue, once finished,  measures approximately 1.200 mm (47.2") in height
- It took about 80 hours to produce it
- The material used was a Greek marble
- The lathe, when used for producing columns and twisted effect details,  allows to obtain work pieces  with max. turnable dimensions: ø 800x3.200 mm (
ø31.5"x126").

Here below a brief photo sequence which describes the processing.



Here below a video clip showing the pre-finish  using the disk.






What else can we say?
Simply that the bridge saw for marble and granite Breton Smart Cut 1000 for marble and granite performs SPECIAL works such as this piece.

Write to mail@breton.it for further info or quotations, we’ll get back to you promptly.
Thank you for the attention and best regards.
Bye-bye

Sergio Prior

Tuesday, 3 February 2015

Breton and Breton USA at TISE West Show in Las Vegas.

Breton Friends,
On January 21 through the 23rd ,  2015, once again Breton Participated in full force at the TISE West Show in Las Vegas.
We are delighted to report that the show once again was a success, we received over 100 visitors from 30 US states, 3 Canadian Provinces, and 4 Foreign Countries.
The clients came to see our Worthy, our latest and greatest monboblock bridgesaw which we had in running order, and to discuss with us their various projects for everything from Traditional Stone Slabbing and Polishing to our very complete line of Fabshop Bridge Saws, Saw Waterjets, CNC routers, and top and edge polishing machinery.
The stand was quite busy throughout and even after show hours,  and with Gerry Van Der Bas, Pietro Zamperin, John Fallon & Egon Hinss  present, as well as our agents Tom Camp from Arizona, Robert Stout from Washington, and Ennio Stocco from Quebec, we felt we did a very good job to make sure each visitor was attended.
The Worthy was quite a big hit, and it seemed we had also many many requests for offers on our Combicut, Smartcut, and NC300 Series.
Also this year a key visitor to our booth on Friday was our ENG. Luca Toncelli one of our owners,  along with his wife Flavia who came by to experience all that is going on in our market. We’d like to thank Mr. Toncelli for his time as well.
 
This year, as in the last several trade exhibitions, we were fortunate to have some clients finalize their transactions with us at the event, and we have been working tirelessly since to follow up on the many requests and resulting closings. Also, we met several new clients that we had not yet met, so we find it was a big success all the way around.

We thank those of you who spent some of your valuable time during the event with us to share our ideas together, and special thanks to our great clients who made it a point to stop by and were so willing to speak to the new visitors about their experiences with our growing organization.
 
So, with that we move forward with those who came, and look forward to the many ,many projects in progress for this year. We’re quite bullish on 2015 thanks to a recovering economy and the drive and commitment to excellence by our clients, and potential clients, and the collective team spirit and customer focused effort  to achieve maximum client satisfaction, of our entire Breton USA Staff.

Bye-bye.
Gerry Van der Bas

Friday, 30 January 2015

60 years in the business world and an ambitious project by Renzo Piano realized with the Maltese Stone

The Maltese company Halmann Vella is famous all over the world for working with marble, granite and Maltese stone. Throughout the years there were numerous prestigious installations including overseas projects such as the London Underground and City Hall. 

This company is the leader in the stone industry in Malta and is currently focusing on the finishing touches to a project in which "archistar" Renzo Piano has been given the responsibility to re-establish the urban planning and architectural layout of the Valletta City Gate providing a deserved entrance to the city, a Unesco heritage site.

The project includes the new parliament building, restoration of the adjacent Opera House, and a new city gate.  Local hardstone has been used so the new City Gate blends in the bastion walls and the surroundings. 


The stone provided by Halmann Vella for the parliament facade is being used in an innovative way providing energy-saving technologies using brise-soleil elements set at an angle to intercept the sun’s rays.

Halmann Vella was able to do it by modernizing its workshops installing some of the latest automatic stoneworking machines supplied by Breton. 
These include: a Levibreton KFT 3600 marble slab polishing line, a Smartcut 550 Optima automatic cutting machine, Combicut DJ/NC waterjet/diamond disc combined cutting machine and a NC Quartz contour-shaping machine.


“We're proud to have been part of this prestigious project, collaborating with one of the most renowned architects in the world” says Hugh Vella of Halmann Vella. 


“It's truly an honour to work with Renzo Piano. Thanks to the latest technology offered by our Breton machines, we've been able to meet his strictest requirements". 

"He's well known for the emphasis he puts on research and experimenting with materials and with the Valletta City Gate these characteristics were carved into natural stone, Maltese stone; the same stone we work every day”.  

Write to mail@breton.it for further info or quotations about our machines, we’ll get back to you promptly.
Thank you for the attention and best regards.
Bye-bye
Sergio Prior